Pre-wall installation system for renovation of concrete panel housing units
For wall-hung WC For the reconstruction of apartment units For installation between two walls For installation into wooden structures For floor thickness 0–200 mm For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
C202
Application
Product details
| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,6 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
- For wall-hung WC
- For the reconstruction of apartment units
- For installation between two walls
- For installation into wooden structures
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
- The weight load is transferred to the side walls by the spacer bar that is adjustable in the range 800-1100 mm
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all Alca and Komfort flush plates
- The cistern is made of one piece, thus ensuring 100% impermeability
- Water supply from the rear/top
- Maintenance work without using any tools
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Mounting depth 125 mm, with waste elbow 160 mm
- Adjustable telescopic feet, range 0–200 mm
- Frame material: powder-coated metal
- EN 14124,EN 14055
| Quantity (package) | 1 pc |
| Quantity (pallet) | 15 pcs |
| Dimensions (piece) | 1195×530×145 mm |
| Dimensions (package) | – mm |
| Weight (piece) | 16,4125 kg |
| Weight (package) | 16,4125 kg |
| Weight (pallet) | 266,1875 kg |
- Cistern with fill and flush valve
- Self-supporting frame with spacer bar for anchoring between walls 800–1100 mm
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- Service opening cover is simply adjustable, screws 4 pcs
| M0017-ND | Inlet fill valve bracket |
| M0021-ND | Inlet sealing (WC systems) |
| M0023-ND | Wrapping seal 45×58×25 (WC systems) |
| M0026-ND | Waste sealing (WC systems) |
| M0028-ND | Coupler sealing (WC systems) |
| M0029-ND | Waste pipe holder |
| M0043B-ND | Inner board for WC systems |
| M0080-ND | Sleeve cover for WC systems |
| M0243-ND | Nut for angle valve bracket |
| M903-ND | Threaded rods + accessories |
| M9030-ND | Threaded rods + accessories |
| M905-ND | Complete mechanism |
| MN0091-ND | Frame sleeve for WC systems |
| MN0092-ND | Frame for WC system sleeve |
| MN0115-ND | Pipe with O-ring for WC systems |
C202 - Installation instructions.pdf 