Pre-wall installation system for dry build up (plasterboard)
For wall-hung WC For mounting in front of a support wall or in to a plasterboard construction For floor thickness 0–200 mm For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
C201
Application
Product details
| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,6 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
- For wall-hung WC
- For mounting in front of a support wall or in to a plasterboard construction
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
- Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
- Angle valve with the ability to connect to the Mepla piping system
- The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all Alca and Komfort flush plates
- Maintenance work without using any tools
- Water supply from the rear/top
- The cistern is made of one piece, thus ensuring 100% impermeability
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Installation depth 125 mm
- Frame material: powder-coated metal
- EN 14124, EN 14055
- 39229000
| Quantity (package) | 1 pc |
| Quantity (pallet) | 15 pcs |
| Dimensions (piece) | 1195×530×145 mm |
| Dimensions (package) | 1195×145×530 mm |
| Weight (piece) | 13,8269 kg |
| Weight (package) | 13,8269 kg |
| Weight (pallet) | 227,4035 kg |
- Cistern with fill and flush valve
- Self-supporting frame
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- The 2 piece cover of the service opening is simply adjustable
| M0017-ND | Inlet fill valve bracket |
| M0021-ND | Inlet sealing (WC systems) |
| M0023-ND | Wrapping seal 45×58×25 (WC systems) |
| M0026-ND | Waste sealing (WC systems) |
| M0028-ND | Coupler sealing |
| M0029-ND | Waste pipe holder |
| M0043B-ND | Inner board |
| M0080-ND | Sleeve lid |
| M0243-ND | Nut for angle valve bracket |
| M903-ND | Threaded rods + accessories |
| M905-ND | Complete mechanism |
| M916-ND | Fixation set |
| MN0091-ND | Frame sleeve |
| MN0092-ND | Frame for WC system sleeve |
| MN0115-ND | Pipe with O-ring for WC systems |
C201 - Installation instructions.pdf 