Pre-wall installation system for building into solid walls
For wall-hung WC For walling in and around the bearing wall – wet process For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
C100
Application
Product details
| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,6 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
- For wall-hung WC
- For walling in and around the bearing wall – wet process
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
- Mounting bracket ensures high rigidity of the toilet connection to the wall
- Dimensions and construction of the console simplify installation
- The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all Alca and Komfort flush plates except for sensor flush plates
- The cistern is made of one piece, thus ensuring 100% impermeability
- Water supply from the rear/top
- Maintenance work without using any tools
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Mounting height 1062 mm
- Installation depth adjustable from 20–95 mm
- Installation depth 125 mm
- Necessary to wall under or use supporting feet M90
- Material support brackets: galvanized metal
- EN 14124, EN 14055
| Quantity (package) | 1 pc |
| Quantity (pallet) | 20 pcs |
| Dimensions (piece) | 1050×480×140 mm |
| Dimensions (package) | – mm |
| Weight (piece) | 7,5308 kg |
| Weight (package) | 7,5308 kg |
| Weight (pallet) | 170,616 kg |
- Cistern with fill and flush valve
- Mounting bracket
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 2 pcs, screw Ø4,8×38 – 2 pcs, dowel Ø12 – 2 pcs, dowel Ø8 – 2 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- Service opening cover is simply adjustable, screws 4 pcs
- Telescopic mounting brackets 2 pcs
- Flush plate C170
| M0005-ND | Water supply ring A100 |
| M0017-ND | Inlet fill valve bracket |
| M0021-ND | Inlet sealing (WC systems) |
| M0023-ND | Wrapping seal 45×58×25 (WC systems) |
| M0026-ND | Waste sealing (WC systems) |
| M0028-ND | Coupler sealing (WC systems) |
| M0029-ND | Waste pipe holder |
| M0042-ND | Flush plate frame spring |
| M0043B-ND | Inner board for WC systems |
| M0046-ND | Console pipe |
| M0080-ND | Sleeve cover for WC systems |
| M0200K-ND | Console |
| M0243-ND | Nut for angle valve bracket |
| M0506-ND | WC cistern hinge support |
| M0507-ND | WC cistern hinges |
| M903-ND | Threaded rods + accessories |
| M905-ND | Complete mechanism |
| MN0091-ND | Frame sleeve for WC systems |
| MN0092-ND | Frame for WC system sleeve |
| MN0101-ND | Flush plate frame |
| MN0114-ND | Flush plate frame pods 4 pcs |
| MN0115-ND | Pipe with O-ring for WC systems |
| MN0118-ND | Flush plate screw spring |
| MN0121C-ND | Stopper |
C100 - Installation instructions.pdf 